How to setup PowerPoint with a projector

I tried Slideshark which is great, however you can only store limited size presentations without paying for extra storage. But I am not able to display those presentations via Epson Projector. What can be done to display the presentation correctly through this projector? Jul 3, I am ready to buy an iPad. One way I am helping to convince myself to get it, is so I can incorporate it into work. My home life is Macbook, Nano and iPhone 4.

LCD Projectors…

How do I connect my laptop to a projector? This cable should have been included with your laptop. Simply connect one end of the VGA adapter to the output port on your laptop this port is next to the headphone connector on the iBooks , then connect the other end to the appropriate connector on the projector or external display.

Sometimes you may have to tell your computer to detect the new projector.

Most likely the green Imaging device is either failing or dirty, leaving more red and blue to pass into the resulting image giving it a pink tent. This was a common problem in older LCD projectors especially when you never clean the filter.

Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune verification firm. Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to. JustAnswer in the News: If you’ve got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers

Software & Driver

How do I connect my laptop to a projector? When you connect your laptop to a projector, your display will be mirrored. You will not be able to use your laptop to display your speaker notes or outline. To connect a projector to your laptop, you will need a special VGA male-to-male connector. This connector has 15 pins on both ends and will plug into a pin female connector on the back of your computer. Sometimes you may have to press a keyboard combination to display the contents of your screen using the projector.

What you show on the projector will be the same thing you see on your laptop’s display. You will not be able to use your laptop to display your speaker notes or outline. To connect a projector to your laptop, you will need a special VGA male-to-male connector.

The device comes with a drop-down stand for minor height adjustments and turning feet for leveling the picture. The lens is manual-focus and takes a small twist to make the picture bigger and crisp. This projector also has a quick boot time of 34 seconds, based on my own testing, which includes turning on the device and choosing the right source. And choosing the source is quick and easy whether using the remote or manually using the device.

Turning this device on is so easy, so quick, and so straightforward that anyone can do it. This projector is capable of gaming, or hooking up a Blu-Ray DVD Player, though it might be wise to purchase another projector if that will be the sole use given the low resolution. While the traditional connections are there, the newer USB and Wi-fi connections are not as straightforward and do require some preparation.

Make sure that the Epson-provided software is installed on the computer or the iProjection software is installed on a mobile or tablet before using either one of the USB or Wi-fi methods. Once the software is installed, using the USB cable is easy and the computer should automatically connect and display assuming the source is chosen. The first choice is the “Quick” option, in which the Projector creates its own Wi-fi access point so a device can easily connect and show its screen – though I had some challenges initially as a Wi-fi password was needed to get working.

The Advanced Connection, which allows you to add the projector to a network so anyone can access it, takes a bit longer as you need to use the remote and enter the Wi-fi name SSID and password of the existing wireless access point. For mobile devices or tablets, a mere download of the iProjection app and a snap of the EX ‘s Wi-fi QR code will automatically connect your device to the projector.

It’s easy, but the app is really designed for a situation where the deck, pictures, or video is already pre-loaded on the mobile device.

Projector/Apple TV/MacBook/Sonos hook-up

Your answer Your name to display optional: Email me at this address if my answer is selected or commented on: Email me if my answer is selected or commented on Privacy: Your email address will only be used for sending these notifications. Who does not have a home projector at home?

I was able to set up the projector and start using it within minutes. The instructions were very detailed and if you follow the instructions you will be set within minutes. This Epson projector is a great presentation projector, and is also a capable video projector. We connected it to Mac devices. We did receive the error, “USB /5(17).

Apr 25, There are a number of things we can try to resolve the problem here. You’ll need to have the mini-DisplayPort to VGA adaptor the “special connector” plugged into the MacBook Pro for it to work, as it actually updates the software on a chip inside that adaptor. You don’t need to have the projector plugged in as well during the update, just the adaptor itself.

I updated mine in this way with no problems. Once that update is complete, plug the projector into the MacBook Pro. Ensure that the projector’s input setting is on the correct input. Then, open System Preferences, and click “Displays”. I recommend that if you do any work with projectors or external displays at all you check the “Show displays in menu bar” box at this point. That will put a menu in your menu bar with a picture of a display on it.

You can close System Preferences now. Then click that menu, and select “Detect Displays”. The displays may flicker at this point. After that, you should see some picture on the projector.

Can’t Connect To Wireless Projector Via Wifi

We always like to give you the best bang for your buck and Epson does an excellent job with that, providing great features, brightness, and sleek designs with their home theater projectors. No matter if you want Wi-Fi capability, a 3D option, or something portable, Epson has all areas covered. The Epson PowerLite Home Cinema , which is very similar to the Home Cinema , has the incredible lens shift options, full calibration controls, and amazing lens, 3D compatibility and an impressive lumens of color brightness and lumens white brightness.

It’s not 4K, but is an excellent standard p HD picture.

The Epson BrightLink Pro Wi Interactive WXGA 3LCD Projector delivers lumens of white, color, and interactive brightness with a low noise level of only 28 dB when using the Eco mode. To ensure sharp detail with deep blacks and brilliant whites, the BrightLink Pro Wi provides an impressive 10, contrast ratio.

It transmits uncompressed digital video and audio over a single, compact cable. The HDMI consortium has banned manufacturers from advertising the release number i. The CEC allows HDMI devices to control each other when necessary and allows the user to operate multiple devices with one remote control. HDMI connections are backwards compatible among the various releases i. Since the conversion is a pin-to-pin connection, there should be no detectable signal loss when converted.

Since video projectors and computer monitors do not typically provide high quality audio, DVI is likely to remain strong in these areas. VGA Cables This is your standard monitor cable. It is typically male-to-male with three rows, 15 pins. A VGA cable is used for computer to monitor, or computer to projector connections. Under ideal circumstances, the DVI cable creates a ‘digital to digital’ connection between video or data source and display device. There are, however, only limited situations when this ideal circumstance occurs.

However, it is considered very user friendly, due in part to its “hot swap” capability.

Your Projector is Not Working? 4 Common Projector Problems and How to Fix Them

How do I hook the data projector up to my laptop? Connect the blue or beige male end of the VGA cord into the female jack on the back of the PC — the UAF laptop jacks have a little rectangular monitor icon next to the jack. Plug the other end into the same kind of jack on the data projector RGB 1. Plug in data projector — Take lens cap off. Turn on PC second!

If you will be using your projector for standard TV, HDTV and DVDs, make sure your projector can switch between these modes. The difference between ceiling-mounted and table top projectors. A ceiling-mounting projector is a popular way to set up a home theater.

Or is it set to only display certain apps? MacBook Pro 13″ 2. Display Notes Through Projector? Dec 30, I’m a professor at a University in Canada, and I’m trying to increase my productivity in the classroom using an iPad and a samsung portable pico projector. What I like to do is jot down discussion topics as they come up in the classroom, and display them on a screen behind me. I’ve been using my windows laptop for this up until now, but thinking it would be much easier to just bring my iPad rather than my whole laptop and power cable.

The Best $1,000 Projector

By Mitch Bartlett 14 Comments Whether you want to watch a movie or show a PowerPoint presentation, it can be quite handy to connect your Android smartphone or tablet to a projector. The amount of options you have depends on the projector you use. Each projector has different ports and features. Wireless App Panasonic provides an Android app you can use for presentations from your device. First and foremost, check to see if your projector has an app that can be used with it.

In this tutorial, we learn how to use Quick Connect Wireless with Epson Projectors. First, make sure you have one cable connected to the projector and one cable connected to the computer with a .

All of the ports are on the back of the Presenter, as shown in Figure 9. There is an HDMI port on the left. Next to that is a VGA port for a computer. The composite and component video and audio ports are next to that. Under these ports, you will see watt speakers flanking the microphone input, the power connector, a digital audio out and a Type A USB port. The back of the Presenter.

There are only three steps to getting the projector to work with your PC. Connect the PC to the projector using the computer video port, transfer the video to the external video port usually done by a key-combination on laptops and choose the source on the projector. Actually, the projector may find the source automatically, but in some circumstances we found we had to press the SearchSource button on the top of the device.

Hooking up the computer by USB is almost as easy. The projector will automatically install the software needed for the USB connection.

How to Connect to an Epson Projector